POMBACH bypass isolation ATS is used in a very important field, including the bank data center, finance, communications industry, airports and other places of great demand for electricity.
The biggest advantage of this type of ATS is the switch maintenance, testing, maintenance, the load does not power.
Bypass isolation type automatic transfer switch is made up of 2
The switch module consists of a standard switch and a bypass switch. The load can be transferred to the bypass switch side in advance before the main switch is taken for maintenance, testing and maintenance. The ATS of the fault can be removed through the guide rail. Until the repair is completed, will switch into re testing position, power supply recovery after the test. The whole process without load.
Provide cabinet type and box type two types.
Each type includes: standard conversion, no power conversion two series
Switch provides 3 basic positions:
A, automatic position: bypass the common side of the contact is disconnected, bypass standby side is also off
B, bypass commonly used: bypass standby side off, bypass common side connection
C, bypass standby: bypass is commonly used to disconnect, bypass alternate connection
Characteristic
Bypass switch with 7S series characteristics
The capacity of the bypass switch is the same as that of the main converter
Allows for the conversion of load off mode to bypass switch side
When the main switch is removed, the self starting function of the generator can still work normally
Switch for the design of the pull out, easy maintenance
Capacity of 200A-4000A
